Browsing Ukrainian translation

Don't show this notice anymore
Before translating, be sure to go through Ubuntu Translators instructions and Ukrainian guidelines.

These translations are shared with snapd in Ubuntu Noble template snappy.

110 of 239 results
4.

Provide a search term for more specific results.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
In Ubuntu:

Для більш конкретних результатів введіть пошуковий термін.
Suggested by Andrii Prokopenko
Located in cmd/snap/cmd_find.go:272
6.

The ack command tries to add an assertion to the system assertion database.

The assertion may also be a newer revision of a pre-existing assertion that it
will replace.

To succeed the assertion must be valid, its signature verified with a known
public key and the assertion consistent with and its prerequisite in the
database.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
In Ubuntu:

Команда ack намагається додати перевірку до бази даних системних перевірок.

Ця перевірка може також бути більш новою редакцією вже створеної перевірки,
що її замінить.

Для успішної перевірки вона має бути дійсною, її підпис має бути перевірено з
відомим відкритим ключем і перевірка узгоджена з її попередніми вимогами у
базі даних.
Suggested by Andrii Prokopenko
Located in cmd/snap/cmd_ack.go:40
7.

The advise-snap command searches for and suggests the installation of snaps.

If --command is given, it suggests snaps that provide the given command.
Otherwise it suggests snaps with the given name.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
In Ubuntu:

Команда advise-snap здійснює пошук і пропонує встановлення snap-пакунків.

Якщо додано --command, вона пропонує snap-пакунки для вказаної команди.
Інакше, пропонує snap-пакунки з вказаним іменем.
Suggested by Andrii Prokopenko
Located in cmd/snap/cmd_advise.go:57
8.

The alias command aliases the given snap application to the given alias.

Once this manual alias is setup the respective application command can be
invoked just using the alias.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
In Ubuntu:

Команда alias прив'язує наведену snap-програму до наведеного синоніму.

Після налаштування цього ручного синоніма відповідну команду програми
можна викликати просто за допомогою цього синоніму.
Suggested by Andrii Prokopenko
Located in cmd/snap/cmd_alias.go:45
10.

The auto-import command searches available mounted devices looking for
assertions that are signed by trusted authorities, and potentially
performs system changes based on them.

If one or more device paths are provided via --mount, these are temporarily
mounted to be inspected as well. Even in that case the command will still
consider all available mounted devices for inspection.

Assertions to be imported must be made available in the auto-import.assert file
in the root of the filesystem.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
In Ubuntu:

Команда auto-import здійснює пошук доступних приєднаних пристроїв,
які шукають перевірки, що підписані довіреними органами, і потенційно
виконує системні зміни на основі них.

Якщо один або декілька шляхів пристрою надаються через -mount,
вони також тимчасово монтуються для огляду. Навіть у такому разі
команда все одно буде розглядати всі доступні змонтовані пристрої
для огляду.

Імпортовані перевірки мають бути доступними в файлі auto-import.assert
в корені файлової системи.
Suggested by Andrii Prokopenko
Located in cmd/snap/cmd_auto_import.go:231
12.

The changes command displays a summary of system changes performed recently.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
In Ubuntu:

Команда changes відображає звіт про останні виконані системні зміни.
Suggested by Andrii Prokopenko
Located in cmd/snap/cmd_changes.go:35
14.

The confinement command will print the confinement mode (strict,
partial or none) the system operates in.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
In Ubuntu:

Команда confinement виведе режим обмеження (strict,
partial або none) в якому працює система.
Suggested by Andrii Prokopenko
Located in cmd/snap/cmd_confinement.go:31
15.

The connect command connects a plug to a slot.
It may be called in the following ways:

$ snap connect <snap>:<plug> <snap>:<slot>

Connects the provided plug to the given slot.

$ snap connect <snap>:<plug> <snap>

Connects the specific plug to the only slot in the provided snap that matches
the connected interface. If more than one potential slot exists, the command
fails.

$ snap connect <snap>:<plug>

Connects the provided plug to the slot in the core snap with a name matching
the plug name.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
In Ubuntu:

Команда connect приєднує вилку до гнізда.
Вона може бути викликана у наступні способи:

$ snap connect <snap>:<вилка> <snap>:<гніздо>

З'єднує надану вилку з даним гніздом.

$ snap connect <snap>:<вилка> <snap>

З'єднує певну вилку лише з гніздом у наданому snap-і, що відповідає
приєднаному інтерфейсу. Якщо існує декілька потенційних гнізд, команда
завершується помилкою.

$ snap connect <snap>:<вилка>

З'єднує надану вилку з гніздом у snap ядра з назвою, що відповідає
назві вилки.
Suggested by Andrii Prokopenko
Located in cmd/snap/cmd_connect.go:37
19.

The create-key command creates a cryptographic key pair that can be
used for signing assertions.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
In Ubuntu:

Команда create-key створює пару криптографічних ключів, що може
бути використання для підписування перевірок.
Suggested by Andrii Prokopenko
Located in cmd/snap/cmd_create_key.go:41
20.

The create-user command creates a local system user with the username and SSH
keys registered on the store account identified by the provided email address.

An account can be setup at https://login.ubuntu.com.
There are line breaks here. Each one represents a line break. Start a new line in the equivalent position in the translation.
(no translation yet)
In Ubuntu:

Команда create-user створює локального користувача системи з іменем користувача
та ключам SSH, зареєстрованими в обліковому записі магазину через надану
електронну адресу.

Обліковий запис може бути налаштований на https://login.ubuntu.com.
Suggested by Andrii Prokopenko
Located in cmd/snap/cmd_create_user.go:33
110 of 239 results

This translation is managed by Ubuntu Ukrainian Translators, assigned by Ubuntu Translators.

You are not logged in. Please log in to work on translations.

Contributors to this translation: Andrii Prokopenko, Ihor Hordiichuk, Mykola Tkach, Okinea Dev, Roman Pavlyshyn, mr.jay, mwp.